| BIS Specifications on Electrical Lamps and Auxiliares and Luminaires (ETD 23) |
| IS No. |
Title |
| IS 418: 1978 |
Tungsten filament general service electric lamps (third revision) |
| IS 897: 1982 |
Tungsten filament electric lamps for railway rolling stock (second revision) |
| IS 1258: 1987 |
Bayonet Lamp Holders (third revision) |
| IS 1534 (PT 1) |
Ballasts for fluorescent lamps: 1977
Part 1 - For switch start circuits (second revision) |
| IS 1569: 1976 |
Capacitors for use in tubular fluorescent, high pressure mercury,
And low pressure sodium vapour discharge lamp circuit (first revision) |
| IS 2215: 1983 |
Starters for fluorescent lamps (third revision) |
| IS 2262: 1963 |
Transformers for high voltage luminous discharge tubes |
| IS 2407: 1963 |
Photometric integrators |
| IS 2418 (PT1): 1977 |
Tubular fluorescent lamps for general lighting service:
Part 1 - Requirements and Tests (first revision) |
| IS 2418 (PT 2): 1977 |
Tubular fluorescent lamps for general lighting service:
Part 2 - Standard lamp data sheets (first revision) |
| IS 2418 (PT3 ): 1977 |
Tubular fluorescent lamps for general lighting service:
Part 3 - Dimensions of G-5 and G-1 3 bi-pin caps (first revision) |
| IS 2418 (PT 4): 1977 |
Tubular fluorescent lamps for general lighting service:
Part 4 - Go and No-go gauges for G-5 and G~1 3 bi-pin caps (first revision). |
| IS 3323 (1980) |
Bi-pin lamp holders for tubular fluorescent lamps (first Revision) |
| IS 3324 (1982) |
Holders for starters for tubular fluorescent lamps (first revision) |
| IS 6616: 1982 |
Ballasts for high pressure mercury vapour lamps (first revision) |
| IS 7027: 1980 |
Transistorised ballasts for fluorescent lamps (first revision) |
| IS 8913: 1978 |
Methods of measurement of lamp cap temperature rise |
| IS 9206: 1979 |
Dimensions of caps for tungsten filament general service electric lamps. |
| IS 9589: 1980 |
Electric lamps for railway signalling. |
| IS 9900 (PT1 ): 1981 |
High Pressure Mercury Vapour lamps:
Part 1 - Requirements and Test
(Superseding IS 2183 and IS 7023) |
| IS 9900 (PT 2): 1981 |
High Pressure Mercury Vapour lamps:
Part 2 -Standard lamp data sheets
(Superseding IS 2183 and IS 7023) |
| IS 9900 (PT 3): 1981 |
High Pressure Mercury Vapour lamps:
Part 3 - Dimensions of lamp caps
(Suspending IS 2183 and IS 7023) |
| IS 9900 (PT 4): 1981 |
High Pressure Mercury Vapour lamps:
Part 4 - Go and No-go gauges of lamp caps
(Superseding IS 2183 and IS 7023) |
| IS 9974 (PT l): 1981 |
High Pressure Sodium Vapour lamps:
Part 1 - General requirements and Tests |
| IS 9974 (PT 2): 1981 |
High Pressure Sodium Vapour lamps:
Part 2 - Standard Lamp data sheets. |
| IS 10276 (PT l): 1982 |
Edison screw lamp holders:
Part 1 - Requirements and tests |
| IS 10276 (PT 2): 1982 |
Edison screw lamp holders:
Part 2- Standard data sheets for lamp holders and gauges |
| IS 12449 (PT l): 1988 |
Starting device (other than glow starters)
Part 1 - General and safety requirements |
| IS 12449 (PT 2): 1988 |
Starting device (other than glow starters)
Part 2 - Performance requirements) |
| IS 12897: 1990 |
Testing of Tungsten filament for general service incandescent lamp-guide |
| IS 12948: 1990 |
Tungsten halogen lamps (non- vehicle ) |
| IS 13021 (PT l): 1991 |
AC supplied electronic ballasts for tubular fluorescent lamps:
Part 1 - General and safety requirements |
| IS 13021 (PT 2): 1991 |
AC supplied electronic ballasts for tubular fluorescent lamps:
Part 2 - Performance requirements - |
